OCRV Center repairs mobile workshops and tool-truck conversions in our Yorba Linda shop, from collision and body work to bent shelving, sagging load floors, and door damage, with insurance billed direct.
A mobile workshop is a box truck, step van, or cargo van loaded with heavy tools: welded shelving, drawer banks, a workbench, a generator or compressor, and a load floor carrying serious weight every day. That weight and the gear inside drive a different repair profile than a passenger vehicle. We repair the body, the structure under the load, and the interior fit-out in our shop.
Mobile workshop repairs we handle
The constant heavy load stresses the floor, the shelf anchors, and the rear and side doors that get opened all day, so we see sagging load floors, pulled-out shelving, and worn roll-up and barn doors alongside collision damage. We repair the body and the structure carrying the weight, reanchor or rebuild shelving and drawer banks, and fix the doors so the workshop is secure and usable again. After an impact we check that the load floor and subframe are still true so the gear sits where it should.
- Collision and body panel repair on box trucks, step vans, and cargo vans
- Sagging load-floor and subframe repair
- Welded shelving, drawer bank, and workbench reanchoring
- Roll-up door, barn door, and side-door repair
- Generator, compressor, and equipment mount repair
Built to carry weight, repaired to carry it again
The biggest difference with a workshop vehicle is the load. Shelving full of tools and a workbench bolted to the wall transfer real force into the body during a collision or a hard stop, so we do not just skin a panel and move on. We verify the floor structure and the anchor points behind the shelving, repair what the load pulled loose, and reinstall the fit-out so it holds.
We document the shelving, drawer banks, bench, and any onboard power for your insurer so the claim reflects the equipped workshop, not an empty box. Insurance is billed direct to your carrier, all in our Yorba Linda shop.
- Load-floor and anchor-point structural verification
- Shelving and bench reinstall to factory or build spec
- Onboard power and equipment mount repair
- Full fit-out documentation for insurance
Frequently asked questions
Can you repair a sagging or damaged load floor in a mobile workshop?+
Yes. Heavy tools and equipment fatigue the floor and the subframe over time, and a collision can buckle them. We repair or reinforce the floor and the structure underneath so it carries the load and the shelving sits level again.
Do you reanchor shelving and drawer banks that pulled loose?+
Yes. We repair the body and anchor points the shelving bolts to, then reinstall the shelving, drawer banks, and workbench so they are secure. If an impact tore them loose, we rebuild the mounting structure first.
Do you bill insurance for mobile workshop repair?+
Yes. We bill your carrier direct and document the shelving, bench, drawers, and onboard power so the estimate reflects the equipped workshop. All work is completed in our Yorba Linda shop.
Who this is for
Explore related pages
Services we provide
What's Included
- ✓A written estimate before any work begins
- ✓Direct insurance billing and supplement handling
- ✓Teardown to find hidden damage, not just surface cracks
- ✓Repairs documented to factory structural specs
- ✓Color matched paint in a downdraft booth
- ✓A multi point quality inspection before delivery
Our Process
- 1
Assessment
Call or request a quote. We review the damage, put a written estimate in your hands, and explain your insurance options.
- 2
Insurance coordination
We bill your carrier direct and handle the photos, paperwork, and supplements so the repair is approved completely.
- 3
Expert repair
Your vehicle moves through our shop across body, paint, structure, and systems, handled by techs who work on rigs like yours daily.
- 4
Quality control
Every vehicle passes a multi point inspection covering structure, paint, seals, and systems before it is cleared.
- 5
Delivery and handover
We return your vehicle clean and documented and walk you through everything that was repaired before you drive away.
OCRV Center vs a typical body shop
| OCRV Center | Typical body shop | |
|---|---|---|
| Vehicle types | ✓RVs, vans, trailers, trucks, buses, EV/Rivian | Cars and light trucks only |
| Work under one roof | ✓Collision, paint, fiberglass, frame, roof, slides, systems | Outsources specialty work |
| Insurance handling | ✓Billed direct, supplements written for hidden damage | You chase the adjuster |
| Facility | ✓35,000 sq ft with lift capacity and a downdraft booth | Cannot fit a 40 ft coach |
| Estimate | ✓Written estimate before work starts | Verbal or vague |
Get the Free Insurance Awareness Booklet
Before you file a claim or choose a shop, know how the process really works. Our Free Booklet breaks down the most common insurance pitfalls and how to avoid them.