# Ceramic Coating Application in Chino > OCRV Center applies professional ceramic coatings to RV and specialty-vehicle finishes in our climate-controlled Yorba Linda shop, bonding a silica-based layer over corrected, decontaminated paint and gelcoat so it sheds water, resists UV fade, and washes far easier. The coating cures in the shop, not outdoors. A ceramic coating is a liquid silica polymer that bonds to the clearcoat or gelcoat and cures into a thin, hard, water-shedding layer. It is not a wax you reapply every few weeks; it is a semi-permanent shell that protects the finish for years. Because the coating seals in whatever is underneath, the prep matters more than the bottle, which is why we correct and decontaminate the surface before a drop of coating goes on, and let it cure indoors in a controlled bay. ## Our application process Before any coating touches the paint we make sure the surface is clinically clean. We correct the finish first, then chemical-decontaminate, clay, and do a final wipe-down with a dedicated prep solvent to strip every trace of polishing oil. A coating bonds to bare clearcoat or gelcoat, so any oil, wax, or residue left behind ruins adhesion and leaves high spots. This prep stage is the bulk of the labor. We apply the coating panel by panel in a controlled indoor bay, spreading it in a cross-hatch pattern and leveling it off in a tight time window before it flashes. The vehicle then sits in the shop to cure, since the coating needs hours of dust-free, dry time to harden and should not see rain or direct sun while it sets. On a large coach that means dedicated booth time, not a parking-lot job. - Mandatory correction and chemical decontamination so the coating bonds to clean paint - Final solvent panel wipe to remove all polishing oils before coating - SiO2 silica coatings matched to clearcoat, gelcoat, glass, and trim - Cross-hatch application and leveling panel by panel under controlled lighting - Indoor, dust-controlled cure time so the coating hardens without rain or sun ## What a coating protects against On a rig that lives outside in Southern California, a ceramic coating earns its keep against UV. The silica layer slows the oxidation and chalking that turn a glossy coach dull, and its hydrophobic surface sheds water so road film, bug splatter, and bird droppings rinse off instead of etching in. After a coating, washing is faster and gentler, which itself protects the finish from the wash-induced swirls that dull most RVs. A coating is a sacrificial protective layer, not body armor. It resists chemical etching and makes the surface far easier to keep clean, but it does not stop rock chips or a parking-lot scrape. We are clear about that up front so you know what you are buying: long-term gloss retention and easier maintenance, especially valuable on a freshly painted coach you want to keep looking new. - Slows UV oxidation, chalking, and fade on paint and gelcoat - Hydrophobic surface sheds water and makes contaminants rinse off easily - Resists chemical etching from bug acids, bird droppings, and road film - Makes routine washing faster and reduces wash-induced swirl marks - Does not prevent rock chips or impact damage, it is a finish protectant ## Frequently asked questions ### How long does ceramic coating an RV take? Most of the time is prep and cure, not the coating itself. Correcting and decontaminating a full coach plus the indoor cure window usually means the rig stays with us for several days. We give you a realistic timeline up front based on the size of the vehicle and the condition of the finish before we start. ### Do I need paint correction before the coating? In almost every case, yes. The coating bonds to and seals whatever is on the paint, so any oxidation or swirls left behind get locked in. We correct the finish first so the coating protects a clean, glossy surface rather than preserving the defects underneath it. ### Can you ceramic coat a freshly painted coach? Yes, and it is a smart way to protect new paint, but fresh paint has to fully cure and outgas first before it can be coated. If we painted the coach we schedule the coating for after that cure window. If another shop painted it, we confirm it is ready before we prep and coat. --- Source: https://oc-rv.com/services/ceramic-coating-application/ OCRV Center, 23281 La Palma Ave, Yorba Linda, CA 92887. Phone (949) 799-3387. In shop only; insurance billed direct.